Advertisements

Ex-SpaceX and Blue Origin employees just snagged $140 million in funding to 3D-print entire rockets — with help from Jared Leto

  • 0

Ex-SpaceX and Blue Origin employees just snagged $140 million in funding to 3D-print entire rockets — with help from Jared Leto

Category : entrepreneur

  • Relativity Space is a startup that plans to use giant 3D-printers, called Stargates, to quickly print entire rockets with 99% fewer parts. 
  • The company was founded in December 2015 by two engineers who used to work at SpaceX and Blue Origin. Today they have a head count of 110 people and hundreds of thousands of feet of facilities.
  • On Tuesday, Relativity Space said it’s now “fully funded to orbit” after a massive new Series C investment round of $140 million — including money from Jared Leto.
  • The company says it has now raised $185 million hopes to launch its first commercial Terran 1 rockets around Earth in early 2021.
  • Long-term, Relativity Space sees its Stargate technology fitting inside the cargo bay of rockets built by SpaceX and Elon Musk to assist with construction and repair on the moon, Mars, and beyond.
  • Visit Business Insider’s homepage for more stories.

Four years ago, the Los Angeles-based rocket startup Relativity Space didn’t exist.

It wasn’t until December 2015 that Tim Ellis, the startup’s CEO and a former Blue Origin rocket-propulsion engineer, and Jordan Noone, the CTO and a former SpaceX employee, put their heads together to build a company to 3D-print rockets and launch them into orbit.

Today, Relativity boasts some impressive statistics: It has 110 workers, roughly 280,000 square feet of workspace, several giant Stargate 3D-printers, and a planned launch site in Cape Canaveral, Florida. It’s also exploring a second launch site in California.

us air force launch complex 16 lc16 terran rocket launch illustration relativity space

An illustration of a Terran-1 rocket by Relativity Space launching from the US Air Force’s Launch Complex 16 in Cape Canaveral, Florida.
Relativity Space

Read more: Defectors from SpaceX, Blue Origin, and Tesla are developing a remarkable technology called ‘Stargate’ to help colonize other planets

But on Tuesday, the company announced perhaps its biggest number yet: a $140 million Series C funding round. The new money boosts Relativity’s total investment to $185 million, the company said.

The funding round, led by Bond and Tribe Capital, attracted cash from scores of new investors, including former Walt Disney executive Michael Ovitz and even Jared Leto. (Yes, the “30 Seconds to Mars” rockstar and Academy Award-winning Joker in “Batman” Jared Leto.)

“He’s actually a very prominent tech investor,” Ellis said. “He’s been involved in a pretty amazing array of iconic technology companies.”

Aside from boosting its investments by 300% in one fell swoop, though, Ellis told Business Insider that, critically, the cash is needed to get Relativity launching  for the first time around early 2021. (A slip from late 2020.)

“The funding round gets us to be fully funded for launching the world’s first fully 3D-printed rocket, Terran 1, to orbit,” Ellis said.

Relativity Space wants to 3D-print rockets to cut their complexity by 99%

relativity space rocket factory stargate 3d metal printers 00001

Relativity Space’s rocket factory uses enormous Stargate machines that 3D-print large spaceflight hardware components out of metal.
Relativity Space

Terran 1 is currently planned to be a roughly 95-foot-tall, 10-engine rocket that delivers small to medium satellites and other payloads into space for $10 million a launch. The maximum payload size is still planned to be about 2,750 pounds (1,250 kilograms), or about the mass of a modern Fiat 500 hatchback.

Powering that printing will be a newer, two-times-larger, and smarter generation of Stargate machines, like the one above. These artificially intelligent 3D printers will be used to create out larger structures, such as rocket bodies and fuel tanks, that smaller Stargates can’t handle. 

“These ones? They can go up to 30 feet high,” Ellis said, but he noted that is an artificial limit: “It’s really still limited by the building size. It’s a very scalable architecture.” (Relativity’s new rocket factory, incidentally, maxes out at about that height.)

The next-generation Stargates should also increase the Terran 1 rocket’s payload area, or fairing, from about 6.5 feet (2 meters) in diameter to about 10 feet (3 meters). That may not sound like much, but Ellis said it doubles the volume — and opens up the company to launching a whole new class of customers.

“Now we can serve even larger satellites,” Ellis said. “A lot of satellites in this medium payload class are actually more volume-limited than mass-limited.”

 

The revenue from such missions would, in theory, help fund even farther-out development and attract more investment. Ellis says the Stargate printers should enable Relativity to roll out a new Terran 1 rocket two months after it’s ordered.

“Normally a lead time for producing a rocket is 12-18 months. So this is significantly faster than traditional methods for the production time,” Ellis previously told Business Insider.

Rapid printing also means rapid development, and the streamlining of parts that 3D-printed structures don’t need. Components like nuts, bolts, washers, and so on can be eliminated by new design possibilities, perhaps reducing the total number of parts in a rocket from about 100,000 down to 5,000 or even 1,000, along the way reducing points of failure.

“Sixty days later, we can produce a totally different rocket style,” Ellis previously said.

Relativity’s long-term plan: Ride aboard SpaceX and Blue Origin rockets to the moon and Mars

elon musk spacex starship mars rocket update presentation city base launch rendering september 28 2019 youtube 29

An illustration of SpaceX’s planned Starship rocket system lifting off from a Mars city and heading back to Earth.
SpaceX/YouTube

For the immediate future, Relativity’s financial gambit is to focus on launching small-to-medium commercial satellites that are too expensive to arrange for flight on larger rockets, or simply take too long to get a spot in a busy launch manifest. To that end, Relativity already has four launch customers lined up.

“We’re proving to people that this is the future and it’s going to happen,” Ellis said. “It’s just fundamentally important that this technology exist, because it’s the way we see the future happen faster, and no one’s really disrupted the core technology stack of aerospace for the last 60 years, and I really believe Terran 1 is doing that.”

In the more distant distant future, though, the company’s founders see their role as a service provider in the cargo holds of SpaceX’s planned Starship rocket system, Blue Origin’s New Glenn or New Armstrong rockets, or anyone or anything else that’s able and willing to fly to the moon and Mars.

Read more: Elon Musk says SpaceX could land on the moon in 2 years. A NASA executive says ‘we’ll partner with them, and we’ll get there faster’ if the company can pull it off.

Ellis envisions Stargate-like factories that fly to other worlds to print everything from replacement rocket parts to human habitats and anything else a person or colony 140 million miles from Earth might need to survive — or just want.

“What do you need to make on another planet? We think there needs to be another company focused on this piece of the puzzle,” Ellis previously said. “I would love to launch our factory to Mars, and then figure out how to scale and sustain that society very quickly.”

Read Relativity Space’s press release on the funding round below.

Relativity Series C Press Release (PDF)

Relativity Series C Press Release (Text)

This story has been updated.

Advertisements

About Author

Sammy Singh

Global VC, Founder, and entrepreneur extraordinaire as featured in Inc. Magazine, Bloomberg, and Forbes. Sammy Singh is a graduate of UCLA and Wharton School of Business as well as a former student of Loyola University of Chicago. Sammy is best known as a renowned financial technology global entrepreneur and has founded over 26 different firms across industry and all over the world. He is a venture capitalist,a TV/ Film actor, tax specialist, and marketing solutions strategist. Connect with Sammy Singh on social media below! www.linkedin.com/in/cfo www.instagram.com/champagnegqpapi www.facebook.com/officialsammysingh www.twitter.com/cxosynergy www.medium.com/@sammysingh www.crunchbase.com/sammysingh

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.